Learn how to pair, add, and reset remote controls for convenient wireless access.

Pair Your Remote

Remote Pairing Guide

Add a New Remote

1. Before pairing a remote, make sure a PIN has already been programmed.
2. Press and hold the ADD button for 3 seconds until you hear a beep.
3. Press any button on the remote control.
4. A single beep confirms that the remote has been paired successfully.
5. To add additional remotes, repeat the same steps.

Note:
The lock is shipped with no PIN programmed by default. After setting a PIN, the remote must be paired before it can be used.

Replace Remote Battery

The remote uses a coin cell battery.

When the battery is depleted:

1. Remove the screws on the remote.
2. Open the back cover.
3. Replace the battery with a new one.
4. Reinstall the cover.

Reset Remote Settings

1. Press and hold the RESET button until you hear a beep.
2. Press the Unlock button.
3. A single beep confirms the factory reset.

Factory Reset will:

• Delete all saved PINs.
• Remove all paired remotes.
• Restore the lock to default settings.

After reset, all PINs and remotes must be programmed again.