Follow this guide to create, add, or reset your PIN code for secure keyless entry.

Set Your PIN

PIN Setup Guide

Add a New PIN

1. Press and hold the ADD button for 3 seconds until you hear a beep.
2. Enter a 4–8 digit PIN, then press the Unlock button.
3. The lock will confirm the setup:
   • One long beep: PIN added successfully.
   • Three beeps: PIN setup failed.
4. To add additional PINs, repeat the same steps.

Note:
The lock is shipped with no PIN programmed by default. After setting a PIN, the remote control will be disabled and must be paired again before use.

Reset PIN Settings

1. Press and hold the RESET button until you hear a beep.
2. Press the Unlock button.
3. A single beep confirms the reset.

Factory Reset will:

• Delete all saved PINs.
• Remove all paired remotes.
• Restore the lock to default settings.

After reset, PINs and remotes must be programmed again.

PIN & Battery Status Indicators

• Correct PIN: One beep and the lock unlocks.
• Incorrect PIN: Three beeps.
• Low battery warning: After the beep, the red indicator flashes three times, or three warning beeps sound.

Replace the batteries when the low battery warning appears.